Glock 34 Gen5 MOS OEM Upper
The Glock 34 Gen5 MOS upper turns your Gen5 frame into a full-length competition pistol. Glock builds this OEM upper with the same factory parts it uses on the G34 Gen5 MOS: a 5.31″ Glock Marksman Barrel, a long nDLC-finished slide, front and rear serrations, and the Modular Optic System cut. Drop it on a compatible frame, mount your red dot and head to the range.
Why Shooters Choose the Glock 34 Gen5 MOS Upper
What’s Included For Glock 34 Gen5 MOS OEM Upper
Glock 34 Gen5 MOS slide (OEM)
5.31″ Glock Marksman Barrel
Recoil spring assembly
Factory slide parts
MOS cover plate
Factory Glock sights
Specifications
| Specification | Detail |
|---|---|
| Model | Glock 34 Gen5 MOS |
| Type | OEM complete upper |
| Caliber | 9mm Luger (9x19mm) |
| Barrel length | 5.31″ (135 mm) |
| Rifling | Enhanced polygonal, 1:9.84″ twist |
| Slide length | 8.15″ (207 mm) |
| Slide width | 1.0″ (25.5 mm) |
| Sight radius | 7.52″ |
| Finish | nDLC |
| Optic ready | Yes, Glock MOS |
| Serrations | Front and rear |
Compatibility
This Glock 34 Gen5 MOS OEM Upper fits:
Glock 34 Gen5 frames
Glock 17 Gen5 frames, which share the same frame dimensions
It does not fit Gen3 or Gen4 frames. Gen5 frames use different internal parts, so match your upper and frame by generation.
How to Install Your Glock 34 Gen5 MOS OEM Upper
- Remove the magazine, lock the slide back and confirm the chamber is empty.
- Release the slide, point the pistol in a safe direction and pull the trigger.
- Pull the slide back slightly, pull down the slide lock on both sides and push the old upper forward off the frame.
- Line up the new upper’s rails with the frame rails and slide it back onto the frame.
- Rack the slide several times and run a function check before you load live ammunition.
Mounting a Red Dot on the Glock 34 Gen5 MOS Slide
- Remove the cover plate screws and lift off the plate.
- Pick the Glock MOS adapter plate that matches your optic’s footprint.
- Install the plate, then mount the optic with the correct screws.
- Torque the screws to the optic maker’s spec and zero the optic at the range.
Frequently Asked Questions
Is this a genuine Glock OEM upper?
Yes. Glock manufactures this upper with factory Gen5 parts, including the Glock Marksman Barrel and nDLC slide.
Will the Glock 34 Gen5 MOS OEM Upper fit my Glock 17 Gen5?
Yes. The Glock 17 Gen5 and Glock 34 Gen5 share the same frame, so this upper turns your G17 Gen5 into a long-slide G34 setup.
Does it fit Gen4 or Gen3 frames?
No. Gen5 uppers use Gen5 internal parts, so pair this upper only with a Gen5 frame.
Which red dots work with the MOS cut?
The MOS system accepts many popular red dot footprints through Glock adapter plates. Check your optic’s footprint and pick the matching plate.
Do I need a gunsmith to install it?
No. You swap the upper the same way you field-strip your Glock. Function-check the pistol before you shoot it.
Is the Glock 34 Gen5 MOS OEM Upper good for competition?
Yes. The long slide, longer sight radius and Marksman Barrel make the G34 one of the most popular pistols in USPSA, IDPA and steel shooting.
Disclaimer
Pistol Uppers USA sells this upper for use on lawfully owned firearms. You must know and follow all federal, state and local laws that apply to buying, owning and installing firearm parts where you live. Glock is a registered trademark of Glock, Inc. Have a qualified gunsmith inspect any firearm you’re unsure about before you use it.



Reviews
There are no reviews yet.